Add copyright header

Objective Cap/Orion SpaceProbe 130EQ Cap.scad

@@ -27,12 +27,6 @@ outer_diameter = 170;   // actual: 167.0 mm
 // [unit: mm]
 wall_thickness = 2; // [1:1:6]
 
-// [unit: mm]
-// inner_diameter = 151.7; // actual: 151.7 mm
-
-// [unit: mm]
-// inner_depth = 10;       // actual:  15.0 mm
-
 difference() {
     cylinder(h=outer_depth+wall_thickness, d=outer_diameter + (wall_thickness*3));
     translate([0, 0, wall_thickness])

Vixen Dovetail/vixen_dovetail_bar.scad

@@ -1,126 +0,0 @@
-/*
- *  Star Adventurer Upgrades - Vixen Dovetail Bar
- * 
- *  Copyright (c) 2021 Steve Cross <flip@foxhollow.cc>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *  
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *  
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-dis_color="#2f99a7";
- 
-channel_height = 15;  // mm, actual: 15mm
-channel_width = 44;   // mm, actual: 44 mm
-channel_angle = 15;   // degrees, actual: 15°
-
-// how long the final bar is to be, in mm
-channel_length = 200; // [20:10:200]
-
-punch_hole_offset = 15;
-punch_hole_d = 6.75; // actual: 6.35 mm
-punch_head_d = 10;   // actual: 9.50 mm
-punch_head_h = 7.5;  // actual: 6.40 mm
-
-punch_slot_count = 4;
-
-$fn = 360;
-
-// flip_upside_down(channel_height)
-    make_vixen_dovetail_bar(channel_length);
-
-module make_vixen_dovetail_bar(length, width = channel_width)
-{
-    difference() {
-        make_base_vixen_dovetail_bar(length);
-
-        translate([channel_width/2, 0, 0])
-            make_all_slots();
-    }
-}
-
-module make_all_slots() {
-    length = (channel_length - (punch_hole_offset * (punch_slot_count+1))) / punch_slot_count;
-    // echo (length);
-
-    for (i = [1:punch_slot_count]) {
-        translate([
-            -punch_head_d/2, // shift to offset the width of the slot
-            (i*punch_hole_offset) + ((i-1)*length), // lay out lengthwise along the bar
-            0
-        ]) 
-        make_dovetail_slot(length);
-    }
-}
-
-module flip_upside_down(height) {
-    translate([0, 0, height])
-        mirror([0, 0, 1])
-        children();
-}
-
-module cylinder2(h, d) {
-    translate([d/2, d/2, 0])
-        cylinder(h=h, d=d);
-}
-
-module make_dovetail_slot(length) {
-    translate([punch_head_d/2, punch_head_d/2, 0]) {
-
-        hull() {
-            cylinder(h= channel_height + 2, d= punch_hole_d);
-
-            // translate([0, length-punch_hole_d/2, 0])
-            translate([0, length-punch_head_d, 0])
-                cylinder(h= channel_height + 2, d= punch_hole_d);
-        }
-
-        translate([0, 0, -1])
-        hull() {
-            cylinder(h=punch_head_h+1, d=punch_head_d);
-
-            // translate([0, length-punch_hole_d/2, 0])
-            translate([0, length-punch_head_d, 0])
-                cylinder(h=punch_head_h+1, d=punch_head_d);
-        }
-    }
-}
-
-module make_base_vixen_dovetail_bar(length, width = channel_width, height = channel_height, angle = channel_angle, oversize = 0) {
-    //   side_a
-    // ______
-    // |    /
-    // |   /
-    // |  / side_c
-    // | /
-    // |/
-    // angle_a
-    //
-    // side_c = side_b / cos(angle_a)
-    // side_a = sqrt(sq(side_c) - sq(side_b))
-    //
-
-    side_c=height / cos(angle); // echo(side_c);
-    side_a = sqrt(pow(side_c, 2) - pow(height, 2)); // echo (side_a);
-
-    translate([0, length, 0])
-    rotate([90, 0, 0])
-    linear_extrude(height = length)
-    polygon(points=[
-        // [x, z]
-        [0, 0], // bottom left
-        [side_a, height],  // top left
-        [width-side_a+oversize, height],  // top right
-        [width+oversize, 0] // bottom right
-    ]);
- }