commit
f231cd0785
@ -0,0 +1,2 @@ |
||||
Sliced |
||||
GCode |
@ -0,0 +1,6 @@ |
||||
include <_bahtinov.scad>; |
||||
|
||||
daperture=55; // aperture diameter |
||||
focal=300; // focal length of the lens or telescope |
||||
dintcap=66; // internal diameter of the cap |
||||
heightcap=12; // height of the cap(=tcap if flat mask) |
@ -0,0 +1,6 @@ |
||||
include <_bahtinov.scad>; |
||||
|
||||
daperture=80; // aperture diameter |
||||
focal=400; // focal length of the lens or telescope |
||||
dintcap=102; // internal diameter of the cap |
||||
heightcap=20; // height of the cap(=tcap if flat mask) |
Binary file not shown.
Binary file not shown.
@ -0,0 +1,117 @@ |
||||
/* BATHINOV-PARAMETRIC-ENGLISH-V2 |
||||
by |
||||
Philippe LECA - 2015-07-24 |
||||
http://www.astrokraken.fr |
||||
leca.philippe@neuf.fr |
||||
|
||||
Updates : |
||||
- number of grooves calculated according to focal length |
||||
- useful ressources and comments |
||||
|
||||
Very useful ressource : |
||||
http://astrojargon.net/MaskGenerator.aspx |
||||
|
||||
The general rule to holes width is f/s=150-200, |
||||
where : |
||||
f is focal length, |
||||
s is hole step size. |
||||
So for telescope with 1500mm focal length the step size is 1500/150=10mm |
||||
(5mm hole, 5mm for uncut space). |
||||
If holes become too small the formula becomes 3f/s=150-200. |
||||
eg for 800mm scope you need to cut 2400/s=200 s=2400/200=12mm |
||||
(6mm cut +6mm uncut). |
||||
The angled cuts are placed at 40 degrees to each other. |
||||
*/ |
||||
|
||||
// general paarmeters --------------------------- |
||||
angle=22; // groove tilt angle |
||||
tmask=2.5; // thickness of the mask |
||||
tcap=2.5; // thickness of the cap's walls |
||||
daperture=80; // aperture diameter |
||||
focal=400; // focal length of the lens or telescope |
||||
bahtinovfactor=150; // usually 150 to 200 |
||||
|
||||
// cap parameters --------------------------- |
||||
|
||||
dintcap=102; // internal diameter of the cap |
||||
dextcap=dintcap+2*tcap; // external diameter of the cap |
||||
heightcap=20; // height of the cap(=tcap if flat mask) |
||||
|
||||
// for MAK or SCT : central hole and ring -------- |
||||
dintcentralhole=0; // =0 if no central hole |
||||
dcentralring=0; // =0 if no central ring |
||||
|
||||
// groove array parameters -------------------- |
||||
widthgroove=(focal/bahtinovfactor)/2; // groove width |
||||
widthwire=widthgroove; // width of the "wires" between grooves |
||||
excessgroove=2; // number of excessive peripherical grooves (2 by default) |
||||
|
||||
$fn=120; |
||||
|
||||
numberdraft=floor(daperture/(widthgroove+widthwire)); |
||||
numbergroove=(floor(numberdraft/2-excessgroove))*2+1; |
||||
|
||||
difference(){ |
||||
union(){ |
||||
// CENTRAL RING FOR MAK OR SCT =================== |
||||
translate([0,0,0])cylinder(d=dcentralring,h= tcap); |
||||
// ARRAY ====================================== |
||||
difference(){ // vertical array |
||||
union(){ |
||||
translate([0,0,0])cylinder(d=daperture,h=tmask); |
||||
} |
||||
union(){ |
||||
// half-disc |
||||
translate([0,-daperture/2-5,-1])cube([daperture/2+5,daperture+10,tmask+2]); |
||||
// groove array |
||||
for (i=[1:numbergroove]){ |
||||
translate([-daperture/2,-(numbergroove+1)*(widthgroove+widthwire)/2-widthgroove/2+i*(widthgroove+widthwire),-1])cube([daperture,widthgroove,tcap+2]); |
||||
} |
||||
} |
||||
} |
||||
difference(){ // right tilted array |
||||
union(){ |
||||
translate([0,0,0])cylinder(d=daperture,h=tmask); |
||||
} |
||||
union(){ |
||||
// quarter disc |
||||
translate([-daperture/2-5,-daperture/2-5,-1])cube([daperture/2+5,daperture+10,tmask+2]); |
||||
translate([0,0,-1])cube([daperture/2+5,daperture/2+5,tmask+2]); |
||||
// groove array |
||||
rotate([0,0,180-angle]){ |
||||
for (i=[2:numbergroove-1]){ |
||||
translate([-daperture/2,-(numbergroove+1)*(widthgroove+widthwire)/2-widthgroove/2+i*(widthgroove+widthwire),-1])cube([daperture,widthgroove,tcap+2]); |
||||
} |
||||
} |
||||
} |
||||
} |
||||
difference(){ // left tilted tilted |
||||
union(){ |
||||
translate([0,0,0])cylinder(d=daperture,h=tmask); |
||||
} |
||||
union(){ |
||||
// quarter disc |
||||
translate([-daperture/2-5,-daperture/2-5,-1])cube([daperture/2+5,daperture+10,tmask+2]); |
||||
translate([0,-daperture/2-5,-1])cube([daperture/2+5,daperture/2+5,tmask+2]); |
||||
// groove array |
||||
rotate([0,0,180+angle]){ |
||||
for (i=[2:numbergroove-1]){ |
||||
translate([-daperture/2,-(numbergroove+1)*(widthgroove+widthwire)/2-widthgroove/2+i*(widthgroove+widthwire),-1])cube([daperture,widthgroove,tcap+2]); |
||||
} |
||||
} |
||||
} |
||||
} |
||||
// STIFFENERS ============================= |
||||
translate([0,-widthgroove,0])cube([daperture/2,2*widthgroove,tmask]); |
||||
translate([-widthgroove,-daperture/2,0])cube([widthgroove*2,daperture,tmask]); |
||||
|
||||
// EXTERNAL RING AND CYLINDER CAP ======================== |
||||
difference(){ |
||||
translate([0,0,0])cylinder(d=dextcap,h=heightcap); |
||||
translate([0,0,tcap])cylinder(d=dintcap,h=heightcap); |
||||
translate([0,0,-1])cylinder(d=daperture,h=tcap+2); |
||||
} |
||||
} |
||||
// CENTRAL HOLE FOR MAK OR SCT ================ |
||||
translate([0,0,-1])cylinder(d=dintcentralhole,h=tcap+2); |
||||
} |
@ -0,0 +1,23 @@ |
||||
/* |
||||
* Astro Parts -- 1.25" Eyepiece Plug |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
include <_eyepiece_plug.scad> |
||||
|
||||
make_1_25_eyepiece_plug(); |
Binary file not shown.
@ -0,0 +1,43 @@ |
||||
/* |
||||
* Astro Parts -- Generic Eyepiece Plug |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
top_diameter_125 = 42; |
||||
inner_d_125 = 31; |
||||
inner_depth_125 = 16; |
||||
|
||||
wall_thickness = 2; |
||||
|
||||
module make_1_25_eyepiece_plug() { |
||||
make_eyepiece_plug(top_diameter_125, inner_d_125, inner_depth_125); |
||||
} |
||||
|
||||
module make_eyepiece_plug(top_diameter, inner_d, inner_depth, thickness=wall_thickness) { |
||||
difference() { |
||||
union() { |
||||
translate([0, 0, thickness]) |
||||
cylinder(h=inner_depth, d=inner_d); |
||||
cylinder(h=thickness, d=top_diameter); |
||||
}; |
||||
translate([0, 0, thickness]) |
||||
cylinder(h=inner_depth+3, d=inner_d-(thickness*2)); |
||||
}; |
||||
} |
||||
|
||||
$fn=360; |
@ -0,0 +1,339 @@ |
||||
GNU GENERAL PUBLIC LICENSE |
||||
Version 2, June 1991 |
||||
|
||||
Copyright (C) 1989, 1991 Free Software Foundation, Inc., |
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
||||
Everyone is permitted to copy and distribute verbatim copies |
||||
of this license document, but changing it is not allowed. |
||||
|
||||
Preamble |
||||
|
||||
The licenses for most software are designed to take away your |
||||
freedom to share and change it. By contrast, the GNU General Public |
||||
License is intended to guarantee your freedom to share and change free |
||||
software--to make sure the software is free for all its users. This |
||||
General Public License applies to most of the Free Software |
||||
Foundation's software and to any other program whose authors commit to |
||||
using it. (Some other Free Software Foundation software is covered by |
||||
the GNU Lesser General Public License instead.) You can apply it to |
||||
your programs, too. |
||||
|
||||
When we speak of free software, we are referring to freedom, not |
||||
price. Our General Public Licenses are designed to make sure that you |
||||
have the freedom to distribute copies of free software (and charge for |
||||
this service if you wish), that you receive source code or can get it |
||||
if you want it, that you can change the software or use pieces of it |
||||
in new free programs; and that you know you can do these things. |
||||
|
||||
To protect your rights, we need to make restrictions that forbid |
||||
anyone to deny you these rights or to ask you to surrender the rights. |
||||
These restrictions translate to certain responsibilities for you if you |
||||
distribute copies of the software, or if you modify it. |
||||
|
||||
For example, if you distribute copies of such a program, whether |
||||
gratis or for a fee, you must give the recipients all the rights that |
||||
you have. You must make sure that they, too, receive or can get the |
||||
source code. And you must show them these terms so they know their |
||||
rights. |
||||
|
||||
We protect your rights with two steps: (1) copyright the software, and |
||||
(2) offer you this license which gives you legal permission to copy, |
||||
distribute and/or modify the software. |
||||
|
||||
Also, for each author's protection and ours, we want to make certain |
||||
that everyone understands that there is no warranty for this free |
||||
software. If the software is modified by someone else and passed on, we |
||||
want its recipients to know that what they have is not the original, so |
||||
that any problems introduced by others will not reflect on the original |
||||
authors' reputations. |
||||
|
||||
Finally, any free program is threatened constantly by software |
||||
patents. We wish to avoid the danger that redistributors of a free |
||||
program will individually obtain patent licenses, in effect making the |
||||
program proprietary. To prevent this, we have made it clear that any |
||||
patent must be licensed for everyone's free use or not licensed at all. |
||||
|
||||
The precise terms and conditions for copying, distribution and |
||||
modification follow. |
||||
|
||||
GNU GENERAL PUBLIC LICENSE |
||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION |
||||
|
||||
0. This License applies to any program or other work which contains |
||||
a notice placed by the copyright holder saying it may be distributed |
||||
under the terms of this General Public License. The "Program", below, |
||||
refers to any such program or work, and a "work based on the Program" |
||||
means either the Program or any derivative work under copyright law: |
||||
that is to say, a work containing the Program or a portion of it, |
||||
either verbatim or with modifications and/or translated into another |
||||
language. (Hereinafter, translation is included without limitation in |
||||
the term "modification".) Each licensee is addressed as "you". |
||||
|
||||
Activities other than copying, distribution and modification are not |
||||
covered by this License; they are outside its scope. The act of |
||||
running the Program is not restricted, and the output from the Program |
||||
is covered only if its contents constitute a work based on the |
||||
Program (independent of having been made by running the Program). |
||||
Whether that is true depends on what the Program does. |
||||
|
||||
1. You may copy and distribute verbatim copies of the Program's |
||||
source code as you receive it, in any medium, provided that you |
||||
conspicuously and appropriately publish on each copy an appropriate |
||||
copyright notice and disclaimer of warranty; keep intact all the |
||||
notices that refer to this License and to the absence of any warranty; |
||||
and give any other recipients of the Program a copy of this License |
||||
along with the Program. |
||||
|
||||
You may charge a fee for the physical act of transferring a copy, and |
||||
you may at your option offer warranty protection in exchange for a fee. |
||||
|
||||
2. You may modify your copy or copies of the Program or any portion |
||||
of it, thus forming a work based on the Program, and copy and |
||||
distribute such modifications or work under the terms of Section 1 |
||||
above, provided that you also meet all of these conditions: |
||||
|
||||
a) You must cause the modified files to carry prominent notices |
||||
stating that you changed the files and the date of any change. |
||||
|
||||
b) You must cause any work that you distribute or publish, that in |
||||
whole or in part contains or is derived from the Program or any |
||||
part thereof, to be licensed as a whole at no charge to all third |
||||
parties under the terms of this License. |
||||
|
||||
c) If the modified program normally reads commands interactively |
||||
when run, you must cause it, when started running for such |
||||
interactive use in the most ordinary way, to print or display an |
||||
announcement including an appropriate copyright notice and a |
||||
notice that there is no warranty (or else, saying that you provide |
||||
a warranty) and that users may redistribute the program under |
||||
these conditions, and telling the user how to view a copy of this |
||||
License. (Exception: if the Program itself is interactive but |
||||
does not normally print such an announcement, your work based on |
||||
the Program is not required to print an announcement.) |
||||
|
||||
These requirements apply to the modified work as a whole. If |
||||
identifiable sections of that work are not derived from the Program, |
||||
and can be reasonably considered independent and separate works in |
||||
themselves, then this License, and its terms, do not apply to those |
||||
sections when you distribute them as separate works. But when you |
||||
distribute the same sections as part of a whole which is a work based |
||||
on the Program, the distribution of the whole must be on the terms of |
||||
this License, whose permissions for other licensees extend to the |
||||
entire whole, and thus to each and every part regardless of who wrote it. |
||||
|
||||
Thus, it is not the intent of this section to claim rights or contest |
||||
your rights to work written entirely by you; rather, the intent is to |
||||
exercise the right to control the distribution of derivative or |
||||
collective works based on the Program. |
||||
|
||||
In addition, mere aggregation of another work not based on the Program |
||||
with the Program (or with a work based on the Program) on a volume of |
||||
a storage or distribution medium does not bring the other work under |
||||
the scope of this License. |
||||
|
||||
3. You may copy and distribute the Program (or a work based on it, |
||||
under Section 2) in object code or executable form under the terms of |
||||
Sections 1 and 2 above provided that you also do one of the following: |
||||
|
||||
a) Accompany it with the complete corresponding machine-readable |
||||
source code, which must be distributed under the terms of Sections |
||||
1 and 2 above on a medium customarily used for software interchange; or, |
||||
|
||||
b) Accompany it with a written offer, valid for at least three |
||||
years, to give any third party, for a charge no more than your |
||||
cost of physically performing source distribution, a complete |
||||
machine-readable copy of the corresponding source code, to be |
||||
distributed under the terms of Sections 1 and 2 above on a medium |
||||
customarily used for software interchange; or, |
||||
|
||||
c) Accompany it with the information you received as to the offer |
||||
to distribute corresponding source code. (This alternative is |
||||
allowed only for noncommercial distribution and only if you |
||||
received the program in object code or executable form with such |
||||
an offer, in accord with Subsection b above.) |
||||
|
||||
The source code for a work means the preferred form of the work for |
||||
making modifications to it. For an executable work, complete source |
||||
code means all the source code for all modules it contains, plus any |
||||
associated interface definition files, plus the scripts used to |
||||
control compilation and installation of the executable. However, as a |
||||
special exception, the source code distributed need not include |
||||
anything that is normally distributed (in either source or binary |
||||
form) with the major components (compiler, kernel, and so on) of the |
||||
operating system on which the executable runs, unless that component |
||||
itself accompanies the executable. |
||||
|
||||
If distribution of executable or object code is made by offering |
||||
access to copy from a designated place, then offering equivalent |
||||
access to copy the source code from the same place counts as |
||||
distribution of the source code, even though third parties are not |
||||
compelled to copy the source along with the object code. |
||||
|
||||
4. You may not copy, modify, sublicense, or distribute the Program |
||||
except as expressly provided under this License. Any attempt |
||||
otherwise to copy, modify, sublicense or distribute the Program is |
||||
void, and will automatically terminate your rights under this License. |
||||
However, parties who have received copies, or rights, from you under |
||||
this License will not have their licenses terminated so long as such |
||||
parties remain in full compliance. |
||||
|
||||
5. You are not required to accept this License, since you have not |
||||
signed it. However, nothing else grants you permission to modify or |
||||
distribute the Program or its derivative works. These actions are |
||||
prohibited by law if you do not accept this License. Therefore, by |
||||
modifying or distributing the Program (or any work based on the |
||||
Program), you indicate your acceptance of this License to do so, and |
||||
all its terms and conditions for copying, distributing or modifying |
||||
the Program or works based on it. |
||||
|
||||
6. Each time you redistribute the Program (or any work based on the |
||||
Program), the recipient automatically receives a license from the |
||||
original licensor to copy, distribute or modify the Program subject to |
||||
these terms and conditions. You may not impose any further |
||||
restrictions on the recipients' exercise of the rights granted herein. |
||||
You are not responsible for enforcing compliance by third parties to |
||||
this License. |
||||
|
||||
7. If, as a consequence of a court judgment or allegation of patent |
||||
infringement or for any other reason (not limited to patent issues), |
||||
conditions are imposed on you (whether by court order, agreement or |
||||
otherwise) that contradict the conditions of this License, they do not |
||||
excuse you from the conditions of this License. If you cannot |
||||
distribute so as to satisfy simultaneously your obligations under this |
||||
License and any other pertinent obligations, then as a consequence you |
||||
may not distribute the Program at all. For example, if a patent |
||||
license would not permit royalty-free redistribution of the Program by |
||||
all those who receive copies directly or indirectly through you, then |
||||
the only way you could satisfy both it and this License would be to |
||||
refrain entirely from distribution of the Program. |
||||
|
||||
If any portion of this section is held invalid or unenforceable under |
||||
any particular circumstance, the balance of the section is intended to |
||||
apply and the section as a whole is intended to apply in other |
||||
circumstances. |
||||
|
||||
It is not the purpose of this section to induce you to infringe any |
||||
patents or other property right claims or to contest validity of any |
||||
such claims; this section has the sole purpose of protecting the |
||||
integrity of the free software distribution system, which is |
||||
implemented by public license practices. Many people have made |
||||
generous contributions to the wide range of software distributed |
||||
through that system in reliance on consistent application of that |
||||
system; it is up to the author/donor to decide if he or she is willing |
||||
to distribute software through any other system and a licensee cannot |
||||
impose that choice. |
||||
|
||||
This section is intended to make thoroughly clear what is believed to |
||||
be a consequence of the rest of this License. |
||||
|
||||
8. If the distribution and/or use of the Program is restricted in |
||||
certain countries either by patents or by copyrighted interfaces, the |
||||
original copyright holder who places the Program under this License |
||||
may add an explicit geographical distribution limitation excluding |
||||
those countries, so that distribution is permitted only in or among |
||||
countries not thus excluded. In such case, this License incorporates |
||||
the limitation as if written in the body of this License. |
||||
|
||||
9. The Free Software Foundation may publish revised and/or new versions |
||||
of the General Public License from time to time. Such new versions will |
||||
be similar in spirit to the present version, but may differ in detail to |
||||
address new problems or concerns. |
||||
|
||||
Each version is given a distinguishing version number. If the Program |
||||
specifies a version number of this License which applies to it and "any |
||||
later version", you have the option of following the terms and conditions |
||||
either of that version or of any later version published by the Free |
||||
Software Foundation. If the Program does not specify a version number of |
||||
this License, you may choose any version ever published by the Free Software |
||||
Foundation. |
||||
|
||||
10. If you wish to incorporate parts of the Program into other free |
||||
programs whose distribution conditions are different, write to the author |
||||
to ask for permission. For software which is copyrighted by the Free |
||||
Software Foundation, write to the Free Software Foundation; we sometimes |
||||
make exceptions for this. Our decision will be guided by the two goals |
||||
of preserving the free status of all derivatives of our free software and |
||||
of promoting the sharing and reuse of software generally. |
||||
|
||||
NO WARRANTY |
||||
|
||||
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY |
||||
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN |
||||
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES |
||||
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED |
||||
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS |
||||
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE |
||||
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, |
||||
REPAIR OR CORRECTION. |
||||
|
||||
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING |
||||
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR |
||||
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, |
||||
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING |
||||
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED |
||||
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY |
||||
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER |
||||
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE |
||||
POSSIBILITY OF SUCH DAMAGES. |
||||
|
||||
END OF TERMS AND CONDITIONS |
||||
|
||||
How to Apply These Terms to Your New Programs |
||||
|
||||
If you develop a new program, and you want it to be of the greatest |
||||
possible use to the public, the best way to achieve this is to make it |
||||
free software which everyone can redistribute and change under these terms. |
||||
|
||||
To do so, attach the following notices to the program. It is safest |
||||
to attach them to the start of each source file to most effectively |
||||
convey the exclusion of warranty; and each file should have at least |
||||
the "copyright" line and a pointer to where the full notice is found. |
||||
|
||||
<one line to give the program's name and a brief idea of what it does.> |
||||
Copyright (C) <year> <name of author> |
||||
|
||||
This program is free software; you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation; either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License along |
||||
with this program; if not, write to the Free Software Foundation, Inc., |
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
|
||||
Also add information on how to contact you by electronic and paper mail. |
||||
|
||||
If the program is interactive, make it output a short notice like this |
||||
when it starts in an interactive mode: |
||||
|
||||
Gnomovision version 69, Copyright (C) year name of author |
||||
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. |
||||
This is free software, and you are welcome to redistribute it |
||||
under certain conditions; type `show c' for details. |
||||
|
||||
The hypothetical commands `show w' and `show c' should show the appropriate |
||||
parts of the General Public License. Of course, the commands you use may |
||||
be called something other than `show w' and `show c'; they could even be |
||||
mouse-clicks or menu items--whatever suits your program. |
||||
|
||||
You should also get your employer (if you work as a programmer) or your |
||||
school, if any, to sign a "copyright disclaimer" for the program, if |
||||
necessary. Here is a sample; alter the names: |
||||
|
||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the program |
||||
`Gnomovision' (which makes passes at compilers) written by James Hacker. |
||||
|
||||
<signature of Ty Coon>, 1 April 1989 |
||||
Ty Coon, President of Vice |
||||
|
||||
This General Public License does not permit incorporating your program into |
||||
proprietary programs. If your program is a subroutine library, you may |
||||
consider it more useful to permit linking proprietary applications with the |
||||
library. If this is what you want to do, use the GNU Lesser General |
||||
Public License instead of this License. |
@ -0,0 +1,132 @@ |
||||
/* |
||||
* Astro Parts -- Generic Split Ring |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
// [unit: mm] |
||||
// how many millimeters from the bottom of the lens mount point to the top of |
||||
// the dovetail bar. do **not** deduct the ring thickness from this number! |
||||
bar_offset = 30; |
||||
|
||||
// [unit: mm] |
||||
dovetail_width = 35; |
||||
|
||||
// [unit: mm] |
||||
ring_inner_d = 76; |
||||
|
||||
// [unit: mm] |
||||
ring_w = 15; |
||||
|
||||
// [unit: mm] |
||||
tab_w = 15; |
||||
|
||||
// [unit: mm] |
||||
tab_bolt_shaft_d = 5; |
||||
|
||||
// [unit: mm] |
||||
tab_nut_d = 10; |
||||
|
||||
// [unit: mm] |
||||
tab_nut_h = 3; |
||||
|
||||
// [unit: mm] |
||||
wall_thickness = 5; |
||||
|
||||
// [unit: mm] |
||||
base_bolt_shaft_d = 6.75; |
||||
|
||||
// [unit: mm] |
||||
// How far from the bottom of the base stand should the nut sit |
||||
base_nut_offset = 10; |
||||
|
||||
// [unit: mm] |
||||
// Diameter of the nut |
||||
base_nut_diameter = 12.5; |
||||
|
||||
// [unit: mm] |
||||
base_nut_height = 4; |
||||
|
||||
ring_outer_d = ring_inner_d + (wall_thickness*2); |
||||
|
||||
overall_width = ring_outer_d + (tab_w * 2); |
||||
|
||||
top_height = ring_outer_d/2; |
||||
|
||||
bottom_height = ring_outer_d/2 + bar_offset; |
||||
|
||||
fh_make_split_ring(); |
||||
|
||||
module fh_make_split_ring_bottom() { |
||||
|
||||
} |
||||
|
||||
module fh_make_split_ring() { |
||||
|
||||
difference() { |
||||
union() { |
||||
// outer ring |
||||
cylinder(h=ring_w, d=ring_outer_d, $fn=360); |
||||
|
||||
// coupling tabs |
||||
cube2([wall_thickness*2, overall_width, ring_w]); |
||||
|
||||
// bottom mounting post |
||||
translate([ring_inner_d/2, -dovetail_width/2, 0]) |
||||
cube([bar_offset, dovetail_width, ring_w]); |
||||
} |
||||
|
||||
// punch out center of ring |
||||
translate([0, 0, -1]) |
||||
cylinder(h=ring_w+2, d=ring_inner_d, $fn=360); |
||||
|
||||
// punch out base bolt hole |
||||
translate([ring_inner_d/2-2.5, 0, ring_w/2]) |
||||
rotate([0, 90, 0]) |
||||
cylinder(d=base_bolt_shaft_d, h=bar_offset+5, center=false, $fn=360); |
||||
|
||||
// punch out the base nut hole |
||||
translate([ring_inner_d/2-1, 0, ring_w/2]) |
||||
rotate([90, 0, 90]) |
||||
cylinder(bar_offset-base_nut_offset+1, d=base_nut_diameter, center=false, $fn=6); |
||||
|
||||
// punch out L tab bolt hole |
||||
translate([-wall_thickness-1, ring_outer_d/2 + tab_w/2, ring_w/2]) |
||||
rotate([0, 90, 0]) |
||||
cylinder(d=tab_bolt_shaft_d, h=wall_thickness*2+2, center=false, $fn=360); |
||||
|
||||
// punch out R tab bolt hole |
||||
translate([-wall_thickness-1, -ring_outer_d/2 - tab_w/2, ring_w/2]) |
||||
rotate([0, 90, 0]) |
||||
cylinder(d=tab_bolt_shaft_d, h=wall_thickness*2+2, center=false, $fn=360); |
||||
|
||||
// punch out L the tab nut hole |
||||
translate([(-wall_thickness-2) - wall_thickness/2, ring_outer_d/2 + tab_w/2, ring_w/2]) |
||||
rotate([90, 0, 90]) |
||||
cylinder(wall_thickness+2, d=tab_nut_d, center=false, $fn=6); |
||||
|
||||
// punch out the R tab nut hole |
||||
translate([(-wall_thickness-2) - wall_thickness/2, -ring_outer_d/2 - tab_w/2, ring_w/2]) |
||||
rotate([90, 0, 90]) |
||||
cylinder(wall_thickness+2, d=tab_nut_d, center=false, $fn=6); |
||||
} |
||||
} |
||||
|
||||
module cube2(dimensions) { |
||||
translate([-dimensions[0]/2, -dimensions[1]/2, 0]) |
||||
cube(dimensions); |
||||
} |
Binary file not shown.
@ -0,0 +1,43 @@ |
||||
/* |
||||
* Astro Parts -- Orion SpaceProbe 130EQ Object Cap |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
// [unit: mm] |
||||
outer_depth = 35; // actual: 35.0 mm |
||||
|
||||
// [unit: mm] |
||||
outer_diameter = 170; // actual: 167.0 mm |
||||
|
||||
// [unit: mm] |
||||
wall_thickness = 2; // [1:1:6] |
||||
|
||||
// [unit: mm] |
||||
// inner_diameter = 151.7; // actual: 151.7 mm |
||||
|
||||
// [unit: mm] |
||||
// inner_depth = 10; // actual: 15.0 mm |
||||
|
||||
difference() { |
||||
cylinder(h=outer_depth+wall_thickness, d=outer_diameter + (wall_thickness*3)); |
||||
translate([0, 0, wall_thickness]) |
||||
cylinder(h=outer_depth+wall_thickness, d=outer_diameter); |
||||
}; |
||||
|
||||
|
||||
$fn = 360; |
@ -0,0 +1,36 @@ |
||||
# Astro Parts |
||||
|
||||
![Preview](media/Preview.png) |
||||
|
||||
## About |
||||
|
||||
This is a collection of assorted astronomy related parts |
||||
|
||||
## Features |
||||
|
||||
## Recent changes |
||||
|
||||
## To-Do List |
||||
|
||||
## License |
||||
Astro Parts is licensed under the GNU General Public License (GPL) v2 or later |
||||
|
||||
Copyright © 2021 Steve Cross |
||||
|
||||
> This program is free software; you can redistribute it and/or modify |
||||
> it under the terms of the GNU General Public License as published by |
||||
> the Free Software Foundation; either version 2 of the License, or |
||||
> (at your option) any later version. |
||||
> |
||||
> This program is distributed in the hope that it will be useful, |
||||
> but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
> MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
> GNU General Public License for more details. |
||||
> |
||||
> You should have received a copy of the GNU General Public License along |
||||
> with this program; if not, write to the Free Software Foundation, Inc., |
||||
> 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
|
||||
Bahtinov Mask is licensed under Creative Commons - Attribution - Non-Commercial |
||||
|
||||
Copyright 2015 Philippe LECA (http://www.astrokraken.fr / leca.philippe@neuf.fr) |
Binary file not shown.
Binary file not shown.
@ -0,0 +1,126 @@ |
||||
/* |
||||
* Star Adventurer Upgrades - Vixen Dovetail Bar |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
dis_color="#2f99a7"; |
||||
|
||||
channel_height = 15; // mm, actual: 15mm |
||||
channel_width = 44; // mm, actual: 44 mm |
||||
channel_angle = 15; // degrees, actual: 15° |
||||
|
||||
// how long the final bar is to be, in mm |
||||
channel_length = 200; // [20:10:200] |
||||
|
||||
punch_hole_offset = 15; |
||||
punch_hole_d = 6.75; // actual: 6.35 mm |
||||
punch_head_d = 10; // actual: 9.50 mm |
||||
punch_head_h = 7.5; // actual: 6.40 mm |
||||
|
||||
punch_slot_count = 4; |
||||
|
||||
$fn = 360; |
||||
|
||||
// flip_upside_down(channel_height) |
||||
make_vixen_dovetail_bar(channel_length); |
||||
|
||||
module make_vixen_dovetail_bar(length, width = channel_width) |
||||
{ |
||||
difference() { |
||||
make_base_vixen_dovetail_bar(length); |
||||
|
||||
translate([channel_width/2, 0, 0]) |
||||
make_all_slots(); |
||||
} |
||||
} |
||||
|
||||
module make_all_slots() { |
||||
length = (channel_length - (punch_hole_offset * (punch_slot_count+1))) / punch_slot_count; |
||||
// echo (length); |
||||
|
||||
for (i = [1:punch_slot_count]) { |
||||
translate([ |
||||
-punch_head_d/2, // shift to offset the width of the slot |
||||
(i*punch_hole_offset) + ((i-1)*length), // lay out lengthwise along the bar |
||||
0 |
||||
]) |
||||
make_dovetail_slot(length); |
||||
} |
||||
} |
||||
|
||||
module flip_upside_down(height) { |
||||
translate([0, 0, height]) |
||||
mirror([0, 0, 1]) |
||||
children(); |
||||
} |
||||
|
||||
module cylinder2(h, d) { |
||||
translate([d/2, d/2, 0]) |
||||
cylinder(h=h, d=d); |
||||
} |
||||
|
||||
module make_dovetail_slot(length) { |
||||
translate([punch_head_d/2, punch_head_d/2, 0]) { |
||||
|
||||
hull() { |
||||
cylinder(h= channel_height + 2, d= punch_hole_d); |
||||
|
||||
// translate([0, length-punch_hole_d/2, 0]) |
||||
translate([0, length-punch_head_d, 0]) |
||||
cylinder(h= channel_height + 2, d= punch_hole_d); |
||||
} |
||||
|
||||
translate([0, 0, -1]) |
||||
hull() { |
||||
cylinder(h=punch_head_h+1, d=punch_head_d); |
||||
|
||||
// translate([0, length-punch_hole_d/2, 0]) |
||||
translate([0, length-punch_head_d, 0]) |
||||
cylinder(h=punch_head_h+1, d=punch_head_d); |
||||
} |
||||
} |
||||
} |
||||
|
||||
module make_base_vixen_dovetail_bar(length, width = channel_width, height = channel_height, angle = channel_angle, oversize = 0) { |
||||
// side_a |
||||
// ______ |
||||
// | / |
||||
// | / |
||||
// | / side_c |
||||
// | / |
||||
// |/ |
||||
// angle_a |
||||
// |
||||
// side_c = side_b / cos(angle_a) |
||||
// side_a = sqrt(sq(side_c) - sq(side_b)) |
||||
// |
||||
|
||||
side_c=height / cos(angle); // echo(side_c); |
||||
side_a = sqrt(pow(side_c, 2) - pow(height, 2)); // echo (side_a); |
||||
|
||||
translate([0, length, 0]) |
||||
rotate([90, 0, 0]) |
||||
linear_extrude(height = length) |
||||
polygon(points=[ |
||||
// [x, z] |
||||
[0, 0], // bottom left |
||||
[side_a, height], // top left |
||||
[width-side_a+oversize, height], // top right |
||||
[width+oversize, 0] // bottom right |
||||
]); |
||||
} |
@ -0,0 +1,38 @@ |
||||
/* |
||||
* Star Adventurer Upgrades - Vixen Dovetail Plate |
||||
* |
||||
* Copyright (c) 2021 Steve Cross <flip@foxhollow.cc> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License along |
||||
* with this program; if not, write to the Free Software Foundation, Inc., |
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
||||
*/ |
||||
|
||||
channel_height = 15; |
||||
channel_width = 44; |
||||
channel_angle = 14; |
||||
|
||||
channel_length = 150; |
||||
|
||||
base_height = 20; |
||||
base_diameter = 70; |
||||
|
||||
$fn = 360; |
||||
|
||||
make_bar(); |
||||
|
||||
//cylinder(h=base_height, d=base_diameter); |
||||
|
||||
module make_bar() { |
||||
cube([channel_width, channel_length, channel_height]); |
||||
} |
Loading…
Reference in new issue